| CHEMISTRY | X-SBR LATEX |
| SOLID CONTENT | 49-50 |
| VISCOSITY | 100-500 |
| MFFT | 25< |
| PH | 7.5-8.5 |
| FILM HARDNESS | Medium |
| Chemistry | X-SBA LATEX |
| viscosity | 300-600 |
| Solid Content | 49-50 |
| PH | 7.5-8.5 |
| MFFT | >0 |
| Film Hardness |
high adhesion to polyethylene and polypropylene films , tacky dry film
| Chemistry | X-SBR LATEX |
| viscosity | 100-400 |
| Solid Content | 49-50 |
| PH | 6.5-7.5 |
| MFFT | >0 |
| Film Hardness | soft |
good adhesion to artificial grass
| Chemistry | X-SBR LATEX |
| viscosity | 50-300 |
| Solid Content | 49-50 |
| PH | 6-7 |
| MFFT | >0 |
| Film Hardness | Medium |
high gloss paper and paper board coating , good print ability
| Chemistry | X-NBR LATEX |
| viscosity | 40-200 |
| Solid Content | 41-43 |
| PH | 6.5-8 |
| MFFT | >0 |
| Film Hardness | Very Soft |
highly oil resistance , excellent dimension stability in high and low temperature , flexible in low temperature
| Chemistry | X-SBR LATEX |
| viscosity | 60-300 |
| Solid Content | 49-50 |
| PH | 6.5-7.5 |
| MFFT | >0 |
| Film Hardness | medium |
high filer load ability,low viscosity compounding,excellent adhesion for secondary back coating for wall to wall carpet
| Chemistry | X-SBR LATEX |
| viscosity | 100-500 |
| Solid Content | 49-50 |
| PH | 7.5-8.5 |
| MFFT | 25< |
| Film Hardness | medium to hard |
excellent water resistance,good filer load ability
| Chemistry | X-SBR LATEX |
| viscosity | 500-2500 |
| Solid Content | 48-50 |
| PH | 4-5 |
| MFFT | >0 |
| Film Hardness | very Soft |
for modification cationic emulsion bitumen
| Chemistry | X-SBA LATEX |
| viscosity | 50-400 |
| Solid Content | 49-50 |
| PH | 7.5-8.5 |
| MFFT | >5 |
| Film Hardness |
high adhesion to synthetic fibers , tacky dry film
| Chemistry | X-SBR LATEX |
| viscosity | 250-650 |
| Solid Content | 49-50 |
| PH | 7.5-8.5 |
| MFFT | >0 |
| Film Hardness | Soft |
high filler/polymer ratio , harder than PAYTEX NL25 , excellent adhesion
| Chemistry | X-SBR LATEX |
| viscosity | 100-500 |
| Solid Content | 49-50 |
| PH | 7.5-8.5 |
| MFFT | 25< |
| Film Hardness | Medium |
good filler load ability excellent water resistant , dipping and back coating technic
محصولات ما آسیب جدی به محیط زیست وارد نمی کنند
مواد ما هیچ مشکلی در برخورد با ظروف ندارد آن را از یخ زدگی و نور خورشید بین 5 تا 35 درجه سانتیگراد نگه دارید
تاریخ انقضاء این محصول: حداقل شش ماه ، آن را در انبار داخلی مناسب نگه دارید.
مقرره (EC) شماره 1272/2008 مجله اروپایی و شورا در تاریخ 16 دسامبر 2008 در مورد طبقه بندی ، برچسب زدن و بسته بندی مواد و مخلوط ها ، اصلاح و لغو دستورالعمل های 67/548 / ΕΟΚ و 1999/45 / EC و اصلاح آیین نامه (EC) شماره 1907/2006
